If you want to see what else is in the works, follow my Instagram! @wiseprints206

more of my designs at: https://www.thingiverse.com/wiseprints206/designs

This is designed to be a footrest for my desk. The back of my desk has this metal plate that is not great to put your feet on, as its somewhat sharp. I whipped this thing up real quick to be printed with ninjaflex (PLA will work as well obviously but ninjaflex is more comfy on the bare feet).

footrest_1.5.stl

If you want to see what else is in the works, follow my Instagram! @wiseprints206

This is designed to be a footrest for my desk. The back of my desk has this metal plate that is not great to put your feet on, as its somewhat sharp. I whipped this thing up real quick to be printed with ninjaflex (PLA will work as well obviously but ninjaflex is more comfy on the bare feet).

This is designed to hold cans of soda while you ride your electric scooter! Specifically designed for an EMOVE cruiser, but will fit any scooter with a squared handle that is around 30mm wide.

If you want to see what else is in the works, follow my Instagram! @wiseprints206

EMOVE cruiser cup holder

emove_1.stl

In my trade it's required to have your license in a visible location on the top portion of your body. I made this to meet that requirement. It sits in the breast pocket of a flannel. The cards slide right in the top of the holder, and it keeps them in fairly well. This will fit 2 cards comfortably, but I think 3 would fit if you tried.

If you want to see what else is in the works, follow my Instagram! @wiseprints206

ID Card Holder

In my trade it's required to have your license in a visible location on the top portion of your body. I made this to meet that requirement. The cards slide right in the top of the holder, and it keeps them in fairly well. This will fit 2 cards comfortably, but I think 3 would fit if you tried.

Card Holder

I bought this nickel strip (https://amzn.to/2ZvNL4v) from amazon to build some batteries, and I realized that if I took it out of the wrapping it would completely uncoil. So I made a simple holder for it, so It dispenses easily. No supports needed, I figured this might save someone else a bit of time!

If you want to see what else is in the works, follow my Instagram! @wiseprints206

Nickel Strip Dispenser

I bought this nickel strip (https://amzn.to/2ZvNL4v) from amazon to build some batteries, and I realized that if I took it out of the wrapping it would completely uncoil. So I made a simple holder for it, so It dispenses easily. No supports needed, I figured this might save someone else a bit of time!

This is something I made for my work, to help hold staples with magnets while you hammer them in. Sometimes it's really a pain in the rear to hold the staple and wire and hammer it into the wall all at the same time. A normal 12/2 or 14/2 staple should fit in the grooves just right so you can hit it with your hammer and not worry about smacking your hand or the staple falling.

These are the magnets I used for this device (you can also find them on banggood.com, 2x10x20mm magnets):

https://amzn.to/3dFwZnV

If you want to see what else is in the works, follow my Instagram! @wiseprints206

Wire Staple Holder

This is something I made for my work, to help hold staples with magnets while you hammer them in. Sometimes it's really a pain in the rear to hold the staple and wire and hammer it into the wall all at the same time. A normal 12/2 or 14/2 staple should fit in the grooves just right so you can hit it with your hammer and not worry about smacking your hand or the staple falling.

These are the magnets I used for this device (you can also find them on banggood.com, 2x10x20mm magnets):

https://amzn.to/3dFwZnV

You ever wanted to go fishing? Now you can with one print and some fishing line. easy peasy one object print and you will be fishing in no time!

If you want to see what else is in the works, follow my Instagram! @wiseprints206

hand fishing reel.stl

You ever wanted to go fishing? Now you can with one print and some fishing line. easy peasy one object print and you will be fishing in no time!

I used these for organization in my garage, you can screw them straight to the wall, and they come in handy. regular size is 100mm, also included is 200mm, and 250mm.

If you want to see what else is in the works, follow my Instagram! @wiseprints206

Screw in storage bins, various sizes

garage_bin_100mm.stl

from center to center of the rails is 200mm, each rail is 50mm. This is for hanging on a rail, so you can make a shelf for flowerpots.

If you want to see what else is in the works, follow my Instagram! @wiseprints206

flower_pot_holder.stl

from center to center of the rails is 200mm, each rail is 50mm. This is for hanging on a rail, so you can make a shelf for flowerpots.

I made this for my roommates at my old house. They needed it.

custom_ashtray

just me making my logo on a coin, and testing how easy it is to upload here

If you want to see what else is in the works, follow my Instagram! @wiseprints206

My_maker_coin_V1

Like my stuff? More of my designs can be found at: https://www.thingiverse.com/wiseprints206/designs

If you want to see what else is in the works, follow my Instagram! @wiseprints206

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow