Yet another bag clip. Here is a useful bag clip that tightly closes a folded plastic bag or similar.  This design is printed as a single part.

My design does not use much filament and comes in three sizes.  The three clip sizes included with clamping sizes of 60, 90 and 120mm, respectively.

For heavy and wide clamping, I've included two versions of the 120mm clamp, 10 and 12mm wide.  The 12mm wide clamp still flexes, but flexes less (my favourite).

I experimented printing the clips in PETG and PLA+.  Both gave what appeared to be quite pliable and usable clips.  I did notice that the PLA+ got more brittle whilst clamping a bag in the freezer and breaking.  In the end, it comes down to your intended use case.  PETG being the most robust of the two filaments I tried.

My prints are made with eSUN PETG 1.75mm Orange filament, with 0.2mm layer height and 15% infill on a Bambu X1 Carbon printer.  No supports required.

I hope that you can find this print useful, too.

Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.

For more of my models, see my main uploads site:
https://makerworld.com/en/u/3687936443

Bag Clip (4 versions)

Bag Clip 60mm.stl

Bag Clip 60x8mm.3mf

Bag Clip 90mm.stl

Bag Clip 90x8mm x 6.3mf

Bag Clip 90x8mm.3mf

Bag Clip 120x10mm.3mf

Bag Clip 120x10mm.stl

Bag Clip 120x12mm x 6.3mf

Bag Clip 120x12mm.3mf

Bag Clip 120x12mm.stl

My metal tweezers invariably get magnetised from general use.  Normally getting magnetised is not a problem and can be demagnetised with some effort, too.  The magnetism becomes an nuisance when handling small nuts and bolts that I often do.

Instead of constantly fiddling with my demagnetiser, I decided to design my own non-metallic tweezers.  These tweezers are made with PLA-CF and have very good rigidity, hence spring open nicely.

I've shared two tweezers with different tips, large and small, respectively.

My print is made in Bambu Lab PLA-CF 1.75mm Burgundy Red filament, with 0.2mm layer height and 15% infill on a Bambu X1 Carbon printer. No supports required.  Wall Loops = 4.

I hope you can find this print useful, too.

Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.

For more of my models, see my main uploads site at MakerWorld as “Wiseone”.
https://makerworld.com/en/u/3687936443

Tweezers (2 types)

Tweezers - Small Tip.3mf

Tweezers - Small Tip.stl

Tweezers - Large Tip.3mf

Tweezers - Large Tip.stl

I'm an Electrical Engineer that likes to solve problems that includes 3D printed parts. I like creating my own designs and will share them here.

My designs collection is best described as eclectic, but each design reflects my needs at the time. Feel free to enjoy my designs for your personal needs, too.

For more of my models, see them first at my main uploads site:
[https://makerworld.com/en/u/3687936443](url)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

wiseone