Enjoy these cute, simple, thick milk bottle vases, which come in three sizes:

- **Bottle A (Small)** - 127 mm / 5 in
- **Bottle B (Medium)** - 190.5 mm / 7.5 in
- **Bottle C (Large)** - 279.3 mm / 11 in

The bottles/vases only differ in height; each has a maximum outer diameter of 82.6 mm and a minimum inner diameter of 39 mm.

Use basic print settings and--voila!--you have instant home decor or a usable vase!

Milk Bottle Vase - Three Sizes

Milk Jug Vase - A (5 in).stl

Enjoy this easy-to-print planter (or design accent, or storage bin, or whatever your imagination decides)! The eye-catching alternating geometric planter can be printed in spiral/vase mode. Consult your slicer software's manual for specific instructions.

This model does not include drainage, so lightweight artificial plants or flowers are ideal.

**Want a sturdier print?**
Print it in traditional layers by setting both infill and top layers to zero, and add as many walls/perimeters and bottom layers as your heart desires.

Geometric Plant Pot (Vase Mode)

Geometric Plant Pot.stl

I could not find the specific filament spool holder I was looking for, so I designed what I wanted. This is my first publicly shared model, so your feedback is appreciated.

**Printing**
The printing orientation is as provided in the file. Demo was printed in PLA at .28 layer height with 3 perimeters on an Anycubic Kobra 2 Max. I also printed at 94% scale on my much smaller FlashForge Adventurer 3 and it was still large enough to hold all the various filament spools I had on hand, although there was a relatively tight fit between the rear of the spools and the wall.

**Assembly**
While the tolerances should support push fit without the use of any adhesive, I strongly recommend using a bit of CA (or your preferred adhesive) where the pieces contact one another. There is lots of surface-to-surface contact area between parts, so the CA will create a very strong bond that will easily support 2kg+ of filament.

**Installation**
Install the two screws either directly to a stud or using drywall anchors. If installing two or more of these beside each other, make sure to leave a gap large enough to get spools in and out of the holder!

**Accessories**
I am working on a few accessories that attach to the hexagon pattern, so please check back for updates on those.

Wall Mounted Dual Filament Holder

Dual Filament Holder - Wall Mount.stl

Dual Filament Holder - Spindle A.stl

Dual Filament Holder - Spindle B.stl

Milk Bottle Vase - A (5 in).stl

Milk Bottle Vase - B (7.5 in).stl

Milk Bottle Vase - C (11 in).stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Destructive Outlet

Pinned models

Wall Mounted Dual Filament Holder

Geometric Plant Pot (Vase Mode)

Milk Bottle Vase - Three Sizes

Milk Bottle Vase - Three Sizes

Geometric Plant Pot (Vase Mode)

Wall Mounted Dual Filament Holder