All of the ForgeCore Original Desktop Games in one place.

Desktop Hockey! 

This is my favorite game that i designed so far, considering I played it for 3 hours straight the day it was finished lol.

This pinball style hockey game is played elimination style. When you score on your opponent, you remove one of their defenders until they have none left. The player with defenders left at the end of the game wins!

For a longer version, play takeover style. Where you collect one of your opponents pieces every time you score, until someone captures all the pieces. This version gets very hectic!

Assembly instructions are in the video on this model page!

Even if you don't have a bambu printer, open the 3mf file. It will help you understand how to print the pieces and the best layout for printing them. You will need a multicolor printer if you want to print all the hockey lines. The multicolor net can be printed with a simple filament swap, or using a multicolor printer.

**Components you'll need to order.**  

1. Standard Rubberband (if you dont have them already)
2. [3/8" chrome steel ball bearings](https://www.amazon.com/dp/B007B2AG3G?psc=1&ref=product_details)

*Disclaimer: You will need a 254 mm print bed or larger for this!

Desktop Hockey

Flinger Shell.stl

Because of the crazy amount of comments asking for a windmill for desktop golf, here it is!

It also has dual purpose, it perfectly fits a can, so you can use it as a Coozy to hold (or hide) your drinks while you work.

There is a single entrance for the ball that splits in two, so you have to line up your shot perfectly to make it straight through

Windmill Coozy for Desktop Golf

Windmill Spinner.stl

This Soccer game not only looks great on your desk, but is a fun and functional game. The Net prints in place and fits perfectly on any 254mm or larger build plate. The Soccer ball can be printed in multicolor to look like a real soccer ball. Print the Flick Discs in your favorite colors.

The game includes Flick Discs. This makes the game actually really fun. You print out 3-5 of these discs for each team, and alternate flicking your discs 3 times to try and score! Although, you can make up your own rules, these worked well when I played it. Look up the rules of Subbuteo for inspiration.

**Assembly Instructions
**
**Net:** Fold sides forward by bending the net. Then snap the top pegs into holes on side poles

**Ball:** I printed the two piece version, glued together using 3D Gloop, or super glue

**Flick Disc:** No Assembly Required



**Printing Instructions**

**Ball:** Print Flat on Build Plate, Can use multicolor if desired

**Net:** See Image

Desktop Soccer

Soccer Goal (diagonal).stl

This is the perfect game for your desk, and makes an excellent gift for golfers/fathers.

This took me a long time to perfect and it is SUPER fun to play. It is a little more complicated to assemble but I promise its worth it!

**Components you'll need to order. ** All of these should be on Amazon Prime

**1. The Balls:** [1/4" Steel Ball Bearings (Amazon)](https://amzn.to/3TIh4f0) 

**2. The Magnets:** [Small Round Magnets (Amazon) ](https://amzn.to/49aFtPP)

**3. The Tube:** [3/8" ID, 1/2" OD PVC Clear Vinyl Tubing (Amazon) ](https://amzn.to/4ayHlDh)

**--Assembly Instructions--**

Everything goes together in an intuitive way. However, here are some instructions on assembly.

**Putting Green**

- Assemble flag onto flag pole, and insert into hole inside the putting green

- Slide the putting green clamps into the putting green holes. Secure to desk with 2 screws

- Install Tube into putting green

**Tee Box**

- Insert screw into Tee Box, tighten onto desk

- Place the Hex Piece into the tee box hex hole

- Click the Club/Spring onto the hex

- Insert Release lever into hole underneath the Tee box

- Cut Tube to length (some sag is fine) and insert into the tube hole. Start with the tube longer than needed and test to see if the ball has the correct speed. Cut tube shorter if more speed is needed

- Install 1 magnet into slot in top side of tee box (push all the way in)
- Install 1 magnet into tube return on tee box (helps to catch the ball)

Desktop Golf

Universal Putting Green (Ontop of Desk).stl

Desktop Basketball is a super fun way to pass the time when you need a break from your work. It works with any standard ping pong ball and can adjust to fit any size desk.

Additional Components You'll Need:

1. Ping-Pong Balls: [Standard Balls (Amazon)](https://amzn.to/4cvPlGN) or [Basketball Style Balls (Amazon) ](https://amzn.to/3TBK9IF)

2. Small Metal Screws: Can pretty much use any screw that is short. No need to buy anything specific



Assembly Instructions:

1. Screw the Rim into the backboard with metal screws.

2. Install the Net into the Rim. You may need to mess around with the angle you insert it, and flex the plastic a little to get it installed.

3. Install the Clamp Screws into the Clamps

4. Slot the finger into one clamp & Slot the pole into the other clamp. 

5. Slot the backboard onto the pole. You're Done!



Desktop Basketball

Net.stl

Desktop Skee-Ball is not only a super fun desktop game, It's the best way to procrastinate. This is the most fun desktop game I've made so far, and it's definitely the coolest looking as well. It's also very aesthetic and can be printed in colors to match your desk setup. These make great gifts but can also be sold for a profit!

**Components you'll need to order.**  All of these should be on Amazon Prime. These are the exact same components as desktop golf.

**1. The Balls:** [1/4" Steel Ball Bearings (Amazon)](https://amzn.to/3TIh4f0)

**2. The Magnets:** [5x3 mm Small Round Magnets (Amazon)](https://amzn.to/49aFtPP)

**3. The Tube:** [3/8" ID, 1/2" OD PVC Clear Vinyl Tubing (Amazon)](https://amzn.to/4ayHlDh)

**--Assembly Instructions--**

Everything goes together in an intuitive way. However, here are some instructions on assembly.

**Machine**

- Snap Bottom Cover onto Machine Base

- Snap Hole Board into Machine Base

- Snap Top Cover onto Machine Base

- Insert Clamps into sides of the Machines

- Screw screws into clamps and secure to desk

- Insert tube into hole on Bottom Cover

**Launcher**

- Install the 2 magnets into the slots as shown below

- Insert screw into Launcher, tighten onto desk

- Place the Hex Piece into the tee box hex hole

- Click the Spring onto the hex

- Insert Release lever into hole underneath the Launcher

- Cut Tube to length (some sag is fine) and insert into the tube hole. Start with the tube longer than needed and test to see if the ball has the correct speed. Cut tube shorter if more speed is needed

Desktop Games

Tags:

Models in this collection

Desktop Hockey

Windmill Coozy for Desktop Golf

Desktop Soccer

Desktop Golf

Desktop Basketball

Desktop Skee-Ball